How to Make a Origami Dimond Video

Download Article

Download Article

Do you want to know how to make a basic origami diamond? If you follow these steps correctly, then you will have an origami diamond neat and correctly folded! This model was designed by Jeremy Shafer and taught on his YouTube channel JeremyShaferOrigami

Steps

1. 1

   Get out a square piece of paper. It can be any kind of paper, though origami paper is best.

2. 

   2

   Fold the paper from left to right or right to left. Crease the fold, then unfold the paper.

3. 

   3

   Fold the paper again, but this time from top to bottom, or bottom to top. Crease the fold, then unfold the paper. The paper should be split into quarters.

4. 

   4

   Flip the paper. Then make a diagonal fold, bringing the bottom right corner of the paper to the top left corner of the paper. Crease the fold, then unfold the paper.

5. 

   5

   Make another diagonal fold, this time bringing the bottom left corner of the paper to the top right corner of the paper. Crease the fold, then unfold the paper.

6. 6

   Make sure your paper is now split into triangles. There should be eight total triangles, and 2 triangles in each fourth of the paper. Anyway, there should be a fold starting from the left side of the paper all the way to the right side of the paper. Not a vertical line, not a diagonal line, but a horizontal line. It doesn't matter which way you place the paper. There should be a line from exactly left to right on the paper. If you didn't crease hard enough, you may have trouble identifying this line. But if you creased correctly, this line should be easy to spot.

7. 

   7

   Once you have found this line, you should also find a line going up and down, splitting the line in half, so there should be a left part and a right part to the horizontal line. Next, bring both parts of the horizontal line together, forming a 3D figure.

8. 

   8

   Identify the two triangles on your paper. Push one of the triangles down on a flat surface, then bring the top triangle down on the bottom triangle. Keep on pushing until both triangles come together into one triangle. You should not be able to push the top triangle further down into the bottom triangle.

9. 

   9

   Notice that the paper has two flaps. Well, you are going to make more flaps! Before you make more flaps, you should see a crease in the center of the triangle, giving a right part and a left part to the triangle. Get hold of the right part of the flap, then fold up that flap to meet the crease in the center. After that, get hold of the left part of the flap, then fold that flap to meet the crease in the center.

10. 

    10

    Flip the paper over, then repeat the previous step.

    • You should have a basic diamond shape right now, but there are still more steps.

11. 

    11

    Find the two Side flaps on one side of the diamond and fold them into the middle.

12. 

    12

    Flip the diamond over and repeat step 11.

13. 

    13

    Flip the paper over, and repeat the last two steps. This time, use the second part of the diamond instead of the first part of the diamond.

14. 

    14

    Flip the "diamond" upside down and notice the two pockets on each side of the "diamond". Extend the pockets with your fingertips, then notice the two flaps on each side of the diamond at the very top of the diamond. Slide each of the flaps at the very top of the diamond into each of the pockets.

15. 

    15

    Flip the paper over, then repeat the previous step again.

16. 

    16

    Blow gently into the bottom of the diamond, extending the top. Make sure you keep the flaps down with your fingers because sometimes if you don't tuck the flaps in very well, the flaps might come out and you may have to start over.

17. 17

    Finished.

Add New Question

• Question

  What are the materials?

  

  The only material needed is simply some origami paper, or any paper cut into a square.

• Question

  Do I have to crease them really well?

  

  It's your choice, but making good creases will improve the quality of your finished work.

• Question

  Where do I put the flaps for the origami diamond in step 14?

  

  Tuck it into the little flaps. It's in the shape of a kite; the tip of the structure is where you'd tuck it inside.

• Question

  Even when I fold the creases and do everything right, it comes apart a little when I blow into it, do you have a tip for that?

  

  Anna Liu

  Community Answer

  Make sure you gently hold the flaps in with your fingers when you blow.

• Question

  If I have to cut out a square, what paper do I use?

  

  Paper that is slightly bigger than the square that you want to cut out.

• Question

  Why won't the diamond puff out fully when I blow on it?

  

  You may not be holding the flaps in enough, and air might be escaping. Try pinching the flaps in harder and see if it works; don't pinch too hard, though.

• Question

  What do I do if my origami diamond isn't inflating?

  

  Use a paper clip/pen/pencil to poke around on the inside to make it puff out more.

• Question

  How do I fold the top part of the diamond down in step 13?

  

  You don't fold anything down, you just fold the excess triangle over to make one triangle as shown in the picture.

• Question

  What paper should I use?

  

  Elizabeth Bolster

  Community Answer

  The best type of paper to use is origami paper since it is thin but printer paper can work as long as there aren't too many folds that make it really small.

• Question

  Where do the flaps go in step 14?

  

  Elizabeth Bolster

  Community Answer

  In step 14, the flaps end up going on the inside of the top of the diamond to tuck it in to the middle.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

• Make sure you crease really well, or else you might have trouble later.

Thanks for submitting a tip for review!

• Make sure you don't turn the paper upside down when bringing the flaps up to the center of the paper because if you do, you won't have any "pockets" to tuck the flaps into when the time comes.

• When blowing to extend top of diamond, make sure you blow gently or else the paper might puff up too much, unfolding everything so you'd have to start over.

About This Article

Thanks to all authors for creating a page that has been read 145,885 times.

Did this article help you?

How to Make a Origami Dimond Video

Source: https://www.wikihow.com/Make-an-Origami-Diamond

Share this post